LED Bulb Manufacturing

manufacturing led bulb

Our lifestyles have significantly changed over the past century. LED bulb becomes the most efficient lighting sources which offers durability, long lifespan, flexible design, energy efficiency, zero ultra-violet emissions and low-voltage operation. Different factors (such as Increasing global population, eco-friendly and energy efficient product) are increasing adoption of LED bulb world-wide. As an average LED bulb’s power consumption is around 50% less than a florescent lamp and 80% less than an incandescent lamp, so there is huge potential for manufacturing LED bulb exists to meet the market demands for both indoor and outdoor lighting. Both global and national markets are looking forward to 100% replace the incandescent and traditional lights with LED bulbs.

LED Bulb Manufacturing Machinery

We offers high quality molds for LED bulb diffuser and housing with enhanced cycle time.
Injection-blow-molding-machine-for-LED-diffuser-manufacturing | LED bulb manufacturing

Injection Blow Molding Machine for LED Diffuser Manufacturing

  • Suitable Machine: 170 Ton.
  • Cycle Time: 15-16 seconds
  • No. of Cavities: 08 cavities
  • Production: 35,000 – 40,000 pieces per day
  • Mold Base: P20
  • Mold Core: S136
  • Runner System: Hot Runner

Vertical Disk Lamp Cup Injection Molding Machine for LED housing

  • Suitable Machine: 160 Ton.
  • Cycle Time: 16-18 seconds
  • No. of Cavities: 08 cavities
  • Production: 43,200 pieces per day
  • Runner System: Hot Runner

Vertical-Injection-Molding-machine-for-LED-bulb-housing-holder-manufacturing, LED bulb manufacturing
Servo Press for Die aluminum alloy spotlight - LED bulb manufacturing

Servo Press for Die Aluminum Alloy Spotlight

  • Model: BPX-110
  • Capacity: 110 Ton
  • Rated Tonnage Point: 6 mm / 3 mm
  • Stroke Length: 180 mm / 80 mm
  • Die Height: 350 mm / 400 mm
  • Slide Adjustment: 80 mm
  • Bolster Area (LRxFB): 1150 x 600 x 120 mm
  • Slide Area (LRxFB): 650 x 470 mm
  • Shank Hole: Ø50 mm
  • Hole of Bolster Plate: 400 x 200 mm
  • Main Motor (KW x P): 11 x 4
  • Slide Adjustment: 0.5 HP x 4 P
  • Machine Dimension: 1900 x 1300 x 3200 (mm)
  • Machine Weight: 9000 kg

Auxiliary Machinery

Boost your production in efficient way by using recommended auxiliary machines
hopper dryer

Hopper Dryer

  • HHD-50EB


Vacuum Auto Loader

  • HAL-300GN (2 sets)

industrial chiller

Industrial Chiller

  • HC-05ACI
  • HC-08ACI

Plastic Crusher


  • HNS-260-400

High Pressure air compressor

High Pressure Air Compressor

  • 3.0 MPA
  • 15 KW (20 HP)

Yangsen Pick up Robot

3-Axis Take out Robot

  • Optional
  • if customer have

oil-mold temperature controller

Mold Temperature Controller

  • Up to 300 C

Belt Conveyor

Conveyor Belt

  • Length: 3 meter
  • Width: 40 cm

Back to list

8 thoughts on “LED Bulb Manufacturing

  1. B374k shell says:

    Great post. I was checking constantly this blog and I am
    impressed! Extremely useful information specifically the last part :
    ) I care for such info much. I was looking for this certain information for a long time.
    Thank you and best of luck.

  2. I am grateful to you for this beautiful content. I have included the content in my favorites list and will always wait for your new blog posts.

  3. I am grateful to you for this beautiful content. I have included the content in my favorites list and will always wait for your new blog posts.

  4. Hi there, I enjoy reading all of your article post.

    I wanted to write a little comment to support you.

  5. Thanks for finally talking about > LED Bulb Manufacturing | Hi Tech LED bulb manufacturing machine < Loved it!

  6. I loved the blog post! I will surely add it to my favorites and visit your post often!

  7. It is a very valuable article. I have added your content to my favorites, I would like to say that I will often visit your new posts 🙂

  8. Nice articles bruh! Like and favorite list add!

Leave a Reply

Your email address will not be published. Required fields are marked *